![Exception: URL fetch failure on AWS_URL: None -- [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:833) I fixed my problem by upgrading the certificate as: pip install --upgrade certifi. Used jeep for sale under dollar10 000 near me](/img/512x512/424001084278.webp)
Self-signed certificates or custom Certification Authorities. GitLab Runner provides two options to configure certificates to be used to verify TLS peers: For connections to the GitLab server: the certificate file can be specified as detailed in the Supported options for self-signed certificates targeting the GitLab server section.For Production, A certificate chain must be added to server configuration which allows your app can access server through api requests. For Development, you can proceed in 2ways. With Self Signed certificate which fails in your case. There must be something wrong with certificate; Without Self Signed certificate a.Typically the certificate chain consists of 3 parties. A root certificate authority; One or more intermediate certificate authority; The server certificate, which is asking for the certificate to be signed. The delegation of responsibility is: Root CA signs → intermediate CA. Intermediate CA signs → server certificateYou have a certificate which is self-signed, so it's non-trusted by default, that's why OpenSSL complains. This warning is actually a good thing, because this scenario might also rise due to a man-in-the-middle attack.Installing extensions... self signed certificate in certificate chain Failed Installing Extensions: ryu1kn.partial-diff Following the advice in a discussion on GitHub, I installed the win-ca extension first: PS C:\> code-insiders.cmd --install-extension ukoloff.win-ca Installing extensions... Installing extension 'ukoloff.win-ca' v3.1.0...To make requests not complain about valid certificate, the certificate supplied to verify= must contain any intermediate certificates. To download full chain, you can use Firefox (screenshots): To download full chain, you can use Firefox (screenshots):If your MongoDB deployment uses SSL, you must also specify the --host option. mongo verifies that the hostname of the mongod or mongos to which you are connecting matches the CN or SAN of the mongod or mongos‘s --sslPEMKeyFile certificate. If the hostname does not match the CN/SAN, mongo will fail to connect.If firewall / proxy / clock isn't a problem, then check SSL certificates being used in pip's SSL handshake. In fact, you could just get a current cacert.pem (Mozilla's CA bundle from curl) and try it using the pip option --cert: $ pip --cert ~/cacert.pem install --user <packagename>.self signed certificate in certificate chain means that certificate chain validation has failed. Your script does not trust the certificate or one of its issuers. For more information see Beginning with SSL for a Platform Engineer. The answer from Tzane had most of what you need. But it looks like you also might want to know WHAT certificate to ...Add a comment. 3. This worked for me: Extract the google-cloud-sdk.zip that the installer downloads. Open up google-cloud-sdk\lib\third_party\requests\session.py. Change the line "self.verify = True" to "self.verify = False". Run the install.bat in the root if the directory you extracted to. Profit. Share.Typically the certificate chain consists of 3 parties. A root certificate authority; One or more intermediate certificate authority; The server certificate, which is asking for the certificate to be signed. The delegation of responsibility is: Root CA signs → intermediate CA. Intermediate CA signs → server certificateTo make requests not complain about valid certificate, the certificate supplied to verify= must contain any intermediate certificates. To download full chain, you can use Firefox (screenshots): To download full chain, you can use Firefox (screenshots):1 answer. For this issue you will need to configure some settings for Proxy and also steps are listed for settings up the proxy configuration in python but you can follow the process of jenkin. azure-sdk-configure-proxy. I will suggest you to please follow this link use-cli-effectively. Please "Accept the answer" if the information helped you.The certificate of the firewall was untrusted/unknown from within my wsl setup. I solved the problem by exporting the firewall certificate from the windows certmanager (certmgr.msc). The certificate was located at "Trusted Root Certification Authorities\Certifiactes" Export the certificate as a DER coded x.509 and save it under e.g. "D:\eset.cer"."ConnectError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)" I am using the following code: `from googletrans import Translator, constants from pprint import pprint trans=Translator() translation=trans.translate(column_list,dest='en')` Here is the detailed error:Hello. I know this query is not itself a pypi security issue but I’been trying to solve this problem by reading differents answers but none of them turn out to be “the solution”,so I would try to breafly explain my situation so you guys can give me a clue. The thing is that when I try to run pip install it start with this warnings and ends with an Error: WARNING: Retrying (Retry(total=4 ...I faced the same problem on Mac OS X and with Miniconda.After trying many of the proposed solutions for hours I found that I needed to correctly set Conda's environment – specifically requests' environment variable – to use the Root certificate that my company provided rather than the generic ones that Conda provides.Failed to renew certificate capacitacionrueps.ieps.gob.ec with error: HTTPSConnectionPool(host='acme-v02.api.letsencrypt.org', port=443): Max retries exceeded with url: /directory (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1123Add a comment. 8. Running just the below two commands, fixed the issue for me. "C:\Program Files (x86)\Microsoft SDKs\Azure\CLI2\python" -m pip install --upgrade pip "C:\Program Files (x86)\Microsoft SDKs\Azure\CLI2\Scripts\pip" install python-certifi-win32. In my case the issue was seen due to invoking a Azure CLI command behind a company ...As suggested by @TrevorBrooks, here are the few workarounds to resolve the above issue As you are using Corporate proxy : Azure CLI must pass an authentication payload over the HTTPS request due to the authentication design of Azure Service, which will be blocked at authentication time at your corporate proxy."ConnectError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)" I am using the following code: `from googletrans import Translator, constants from pprint import pprint trans=Translator() translation=trans.translate(column_list,dest='en')` Here is the detailed error:1 git config --global http.sslVerify false Resolution - Configure Git to trust self signed certificate To make more accurate fix to the problem "SSL certificate problem: self signed certificate in certificate chain" we need to - Get the self signed certificate Put/save it into - **~/git-certs/cert.pem**Apr 3, 2023 · This can occur if the certificate is self-signed, or if it is signed by an untrusted certificate authority. Solution. Configure Git to trust the self-signed certificate globally: You can configure Git to trust the self-signed certificate globally by adding an 'http.sslCAInfo' setting to your Git configuration file. Here's an example of how to ... Installing extensions... self signed certificate in certificate chain Failed Installing Extensions: ryu1kn.partial-diff Following the advice in a discussion on GitHub, I installed the win-ca extension first: PS C:\> code-insiders.cmd --install-extension ukoloff.win-ca Installing extensions... Installing extension 'ukoloff.win-ca' v3.1.0...1 git config --global http.sslVerify false Resolution - Configure Git to trust self signed certificate To make more accurate fix to the problem "SSL certificate problem: self signed certificate in certificate chain" we need to - Get the self signed certificate Put/save it into - **~/git-certs/cert.pem**We reran the security scan and it detected this error: The X.509 certificate chain for this service is not signed by a recognized certificate authority. If the remote host is a public host in production, this nullifies the use of SSL as anyone could establish a man-in-the-middle attack against the remote host.It is probably because either root.cert or inter.cer or both doesn't have 'CA:TRUE' in 'x509 Basic Constraints'. You can read the both root and intermediate cert and check for the extension: openssl x509 -in root.cer -noout -text. And, look for the following, it must be set for the verification to work. X509v3 Basic Constraints: CA:TRUE. Share.Jun 17, 2021 at 18:05. 1. First step is to be able download anythink using apk. Second step (the step you are asking) is to download ca-certificates tool and then add CA standard way with calling update-ca-certificates. First step is more or less hack.openssl s_client -showcerts -servername security.stackexchange.com -connect security.stackexchange.com:443 CONNECTED (00000004) depth=2 O = Digital Signature Trust Co., CN = DST Root CA X3 verify return:1 depth=1 C = US, O = Let's Encrypt, CN = Let's Encrypt Authority X3 verify return:1 depth=0 CN = *.stackexchange.com verify return:1 ---Failed to renew certificate capacitacionrueps.ieps.gob.ec with error: HTTPSConnectionPool(host='acme-v02.api.letsencrypt.org', port=443): Max retries exceeded with url: /directory (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1123At work, Windows 10 environment, using Cmder console emulator. --trusted-host used to resolve the "'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain" issue. Today it stopped working."certificate verify failed: self signed certificate in certificate chain" OR "certificate verify failed: unable to get local issuer certificate" This might be caused either by server configuration or Python configuration. In this article, we assume you use a self-signed CA certificate in z/OSMF.3. From your code: cert_reqs=ssl.CERT_REQUIRED, ca_certs=None. From the documentation of wrap_socket: If the value of this parameter is not CERT_NONE, then the ca_certs parameter must point to a file of CA certificates. Essentially you are asking in your code to validate the certificate from the server ( CERT_REQUIRED) but specify at the same ...This is bad advice. Essentially, you silently turn off all security when accessing the internet, opening the app to all imaginable attack vectors. If you MUST trust a self-signed certificate and can not install it on the device, you should be selective and ONLY accept this one self-signed token. –For Production, A certificate chain must be added to server configuration which allows your app can access server through api requests. For Development, you can proceed in 2ways. With Self Signed certificate which fails in your case. There must be something wrong with certificate; Without Self Signed certificate a.This server's certificate chain is incomplete. Grade capped to B. This means that the server is not sending the full certificate chain as is needed to verify the certificate. This means you need to add the missing certificates yourself when validating.I have a similar issue on my Raspberry Pi OS bullseye. curl on the failing URL works just fine. And curl detects invalid certificates just fine. (tested this) So something about pip must be going wrong. sudo apt install python3-dev python3-pip libxml2-dev libxslt1-dev zlib1g-dev libffi-dev libssl-dev. worked for me.By default, Puppet's CA creates and uses a self-signed certificate. In that case, there is a self-signed certificate in the certificate chain of every cert it signs. This is not normally a problem, and I'm not sure offhand why it is causing an issue for you.Trying to install Airflow on a Windows server, I receive lost of certificate errors. Is there a way to bypass certificates checking while installing? For GitPython: C:\\apache-airflow-2.5.1>pip i...Sep 2, 2017 · To check if you site has a valid certificate run: curl https://target.web.site/ If you get a message "SSL certificate problem: self signed certificate" you have a self signed certificate on your target. If you get a proper answer from the site then the certificate is valid. This is bad advice. Essentially, you silently turn off all security when accessing the internet, opening the app to all imaginable attack vectors. If you MUST trust a self-signed certificate and can not install it on the device, you should be selective and ONLY accept this one self-signed token. –[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:997) Certificate verification failed. This typically happens when using Azure CLI behind a proxy that intercepts traffic with a self-signed certificate. Please add this certificate to the trusted CA bundle.The docs are actually incorrect, you have to set SSL to verify_none because TLS happens automatically. From Heroku support: "Our data infrastructure uses self-signed certificates so certificates can be cycled regularly... you need to set the verify_mode configuration variable to OpenSSL::SSL::VERIFY_NONE"Aug 17, 2018 · 2 I'm trying to use a service that uses a self-signed cert. Download the cert: # printf QUIT | openssl s_client -connect my-server.net:443 -showcerts 2>/dev/null > my-server.net.crt Check that it's self signed (issuer and subject are the same): Git - "SSL certificate issue: self signed certificate in certificate chain" 1 How to fix 'GitHub.Services.OAuth.VssOAuthTokenRequestException' on a self-hosted runner for GitHub Actions"ConnectError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129)" I am using the following code: `from googletrans import Translator, constants from pprint import pprint trans=Translator() translation=trans.translate(column_list,dest='en')` Here is the detailed error:self.host="KibanaProxy" self.Port="443" self.user="test" self.password="test" I need to suppress certificate validation. It works with curl when using option -k on command line.well, if it a self signed one, it won't work. Dart does not allow self signed certificates. One solution (a bad one imho) is to allow certificates, even invalid ones, but it removes the core principle of using certificates. –Mar 27, 2020 · 13 I found my way to this post while Googling. In my case, the error message I received was: SSL validation failed for https://ec2.us-west-2.amazonaws.com/ [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1091) Exception: URL fetch failure on AWS_URL: None -- [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:833) I fixed my problem by upgrading the certificate as: pip install --upgrade certifiself signed certificate in certificate chain means that certificate chain validation has failed. Your script does not trust the certificate or one of its issuers. For more information see Beginning with SSL for a Platform Engineer. The answer from Tzane had most of what you need. But it looks like you also might want to know WHAT certificate to ...Apr 3, 2023 · This can occur if the certificate is self-signed, or if it is signed by an untrusted certificate authority. Solution. Configure Git to trust the self-signed certificate globally: You can configure Git to trust the self-signed certificate globally by adding an 'http.sslCAInfo' setting to your Git configuration file. Here's an example of how to ... openssl s_client -showcerts -servername security.stackexchange.com -connect security.stackexchange.com:443 CONNECTED (00000004) depth=2 O = Digital Signature Trust Co., CN = DST Root CA X3 verify return:1 depth=1 C = US, O = Let's Encrypt, CN = Let's Encrypt Authority X3 verify return:1 depth=0 CN = *.stackexchange.com verify return:1 ---For Production, A certificate chain must be added to server configuration which allows your app can access server through api requests. For Development, you can proceed in 2ways. With Self Signed certificate which fails in your case. There must be something wrong with certificate; Without Self Signed certificate a.At work, Windows 10 environment, using Cmder console emulator. --trusted-host used to resolve the "'SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain" issue. Today it stopped working.Your app is no longer connecting to Redis and you are seeing errors relating to self-signed certificates. Eg: <OpenSSL::SSL::SSLError: SSL_connect returned=1 errno=0 state=error: certificate verify failed (self signed certificate in certificate chain)> SSL_connect returned=1 errno=0 state=error: certificate verify failed (self signed ...To check whether your root cert has the CA attribute set, run openssl x509 -text -noout -in ca.crt and look for CA:True in the output. Note that OpenSSL will actually let you sign other certs with a non-CA root cert (or at least used to) but verification of such certs will fail (because the CA check will fail).hello when I run chiang I get the following problem [ ERROR] --- Failed to send events over telegram: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129) (notify_manager....Node.js dependency installation giving "self signed certificate in certificate chain" 0 Installing custom SSL certificate in Node (UNABLE_TO_VERIFY_LEAF_SIGNATURE)Of course. This is a simple example that I copied from one of the tutorials. import pandas as pd import openai import certifi certifi.where() import requests openai.api_key = 'MY_API_KEY' response = openai.Completion.create( model="text-davinci-003", prompt="I am a highly intelligent question answering bot.You can define context for each request and pass the context on each request for use it like below: import certifi import ssl import urllib context = ssl.create_default_context (cafile=certifi.where ()) result = urllib.request.urlopen ('https://www.example.com', context=context) OR Set certificate file in environment.We're using a self-signed certificate, hence [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129). Does poetry not have a way around that?The issue with a self-signed cert is you must trust it, even if it's the a not the correct/safe approach. The correct/safe method is to avoid using a self-signed cert and use one issued by a trusted authority. A slightly less bad idea than that might be to import the self-signed cert into Python's list of trusted certificates, wherever that is.Trying to install Airflow on a Windows server, I receive lost of certificate errors. Is there a way to bypass certificates checking while installing? For GitPython: C:\\apache-airflow-2.5.1>pip i...Your app is no longer connecting to Redis and you are seeing errors relating to self-signed certificates. Eg: <OpenSSL::SSL::SSLError: SSL_connect returned=1 errno=0 state=error: certificate verify failed (self signed certificate in certificate chain)> SSL_connect returned=1 errno=0 state=error: certificate verify failed (self signed ...Here's how to trust the untrusted certificates in the chain for the az cli. This is assuming you want to trust the certificate chain. Mine was broken because of a corporate self-signed certificate. Use the command to list the certificates in the chain. openssl s_client -connect domainYouWantToConnect.com:443 -showcerts1 answer. For this issue you will need to configure some settings for Proxy and also steps are listed for settings up the proxy configuration in python but you can follow the process of jenkin. azure-sdk-configure-proxy. I will suggest you to please follow this link use-cli-effectively. Please "Accept the answer" if the information helped you.Old post. But answering for my future self and anyone else who gets stuck at this! First locate the pip.conf(linux): [root@localhost ~]# pip3 config -v list For variant 'global', will try loading '/etc/xdg/pip/pip.conf' For variant 'global', will try loading '/etc/pip.conf' For variant 'user', will try loading '/root/.pip/pip.conf' For variant 'user', will try loading '/root/.config/pip/pip ...Jun 17, 2021 at 18:05. 1. First step is to be able download anythink using apk. Second step (the step you are asking) is to download ca-certificates tool and then add CA standard way with calling update-ca-certificates. First step is more or less hack.hello when I run chiang I get the following problem [ ERROR] --- Failed to send events over telegram: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1129) (notify_manager....If firewall / proxy / clock isn't a problem, then check SSL certificates being used in pip's SSL handshake. In fact, you could just get a current cacert.pem (Mozilla's CA bundle from curl) and try it using the pip option --cert: $ pip --cert ~/cacert.pem install --user <packagename>.It turns out the first computer only tests through a verification depth of 2, whereas the second computer tests to a verification depth of 3, resulting in the following: depth=3 C = US, O = "The Go Daddy Group, Inc.", OU = Go Daddy Class 2 Certification Authority verify error:num=19:self-signed certificate in certificate chain verify return:1 ...On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file.I agree with above answers, do the following. 1- Remove your cli and install latest cli. 2- check the certificate exist: C:\Program Files\Amazon\AWSCLIV2\botocore\cacert.pem. 3- if it doesn't exist remove the cli and go to: C:\Program Files\ and remove Amazon.The certificate of the firewall was untrusted/unknown from within my wsl setup. I solved the problem by exporting the firewall certificate from the windows certmanager (certmgr.msc). The certificate was located at "Trusted Root Certification Authorities\Certifiactes" Export the certificate as a DER coded x.509 and save it under e.g. "D:\eset.cer".To check whether your root cert has the CA attribute set, run openssl x509 -text -noout -in ca.crt and look for CA:True in the output. Note that OpenSSL will actually let you sign other certs with a non-CA root cert (or at least used to) but verification of such certs will fail (because the CA check will fail).For Production, A certificate chain must be added to server configuration which allows your app can access server through api requests. For Development, you can proceed in 2ways. With Self Signed certificate which fails in your case. There must be something wrong with certificate; Without Self Signed certificate a.ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1056) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "<my_install_location>\Python\lib\site-packages\requests\adapters.py", line 449, in sendThis can occur if the certificate is self-signed, or if it is signed by an untrusted certificate authority. Solution. Configure Git to trust the self-signed certificate globally: You can configure Git to trust the self-signed certificate globally by adding an 'http.sslCAInfo' setting to your Git configuration file. Here's an example of how to ...As suggested by @TrevorBrooks, here are the few workarounds to resolve the above issue As you are using Corporate proxy : Azure CLI must pass an authentication payload over the HTTPS request due to the authentication design of Azure Service, which will be blocked at authentication time at your corporate proxy.In our case the issue was related to SSL certificates signed by own CA Root & Intermediate certificates. The solution was - after finding out the location of the certifi's cacert.pem file (import certifi; certifi.where()) - was to append the own CA Root & Intermediates to the cacert.pem file.
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1056) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "<my_install_location>\Python\lib\site-packages\requests\adapters.py", line 449, in send. Peduriri.pdf
I was playing with some web frameworks for Python, when I tried to use the framework aiohhtp with this code (taken from the documentation): import aiohttp import asyncio #*****...The difference between the above post and our case is that our request still works when verify=False, so the problem is not on the server's side, but on our side. And so, we try the above answer And so, we try the above answerssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1056) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "<my_install_location>\Python\lib\site-packages\requests\adapters.py", line 449, in sendWe are moving a live site to a new server. I am following the instructions from Certbot - Ubuntufocal Apache. Currently the domain is pointing to the old server ip; I am using a host file entry for now. While a short amount of down time is acceptable, since the process is effectively failing at the first step I really want to get this resolved before we do the move. It is required that we have ...Exception: URL fetch failure on AWS_URL: None -- [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:833) I fixed my problem by upgrading the certificate as: pip install --upgrade certifiFrom verify documentation: If a certificate is found which is its own issuer it is assumed to be the root CA. In other words, root CA needs to be self signed for verify to work. This is why your second command didn't work. Try this instead: openssl verify -CAfile RootCert.pem -untrusted Intermediate.pem UserCert.pem.Aug 17, 2018 · 2 I'm trying to use a service that uses a self-signed cert. Download the cert: # printf QUIT | openssl s_client -connect my-server.net:443 -showcerts 2>/dev/null > my-server.net.crt Check that it's self signed (issuer and subject are the same): "certificate verify failed: self signed certificate in certificate chain" OR "certificate verify failed: unable to get local issuer certificate" This might be caused either by server configuration or Python configuration. In this article, we assume you use a self-signed CA certificate in z/OSMF.In our case the issue was related to SSL certificates signed by own CA Root & Intermediate certificates. The solution was - after finding out the location of the certifi's cacert.pem file (import certifi; certifi.where()) - was to append the own CA Root & Intermediates to the cacert.pem file.Use a certificate that is signed by a Certificate Authority. These certificates are automatically trusted. Note that the complete certificate chain should be included (include any intermediate certs up to the trusted root CA). If only the end-user certificate is included, Git clients will still not be able to verify the certificate.Aug 17, 2018 · 2 I'm trying to use a service that uses a self-signed cert. Download the cert: # printf QUIT | openssl s_client -connect my-server.net:443 -showcerts 2>/dev/null > my-server.net.crt Check that it's self signed (issuer and subject are the same): In this case, it looks like the root certificates database on your system got screwed up. On Ubuntu (and maybe other distributions), running this command reloads the root certificates on the system, which fixes the problem: update-ca-certificatesInstalling extensions... self signed certificate in certificate chain Failed Installing Extensions: ryu1kn.partial-diff Following the advice in a discussion on GitHub, I installed the win-ca extension first: PS C:\> code-insiders.cmd --install-extension ukoloff.win-ca Installing extensions... Installing extension 'ukoloff.win-ca' v3.1.0...ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: self signed certificate in certificate chain (_ssl.c:1056) I'm inclined to assume this is a problem with my Pycharm configuration as this problem only occurs in Pycharm when using any version of Python3..
